Marine inspections and project management

Catamaran specialists.

Independent inspections and full project management up to 140 feet. Thirty-five years of frontline repair experience, including direct warranty and fleet work with Leopard, The Moorings and Sunsail.

35 yearsFrontline marine repair
140 ftLargest vessels inspected
LeopardDirect warranty claims
Catamaran profile, hull section and deck plan with condition markers Line drawing of a cruising catamaran with four survey markers: hull and deck join serviceable, rudder bearing requires attention, keel good, standing rigging good. Hull / deck join S Rudder bearing R Keel G Standing rigging G
G Good S Serviceable R Requires attention
Experience

Trusted across the production catamaran fleet.

  • Leopard
  • Catana
  • Fountaine Pajot
  • Outremer
  • Lagoon
  • Sunreef

Warranty claims

We have experience in direct warranty work with Leopard and Beneteau, our testing and documentation is designed to meet the manufacturers requirements.

Charter fleets

Our experience includes technical management of local fleets The Moorings and Sunsail.

Pacific Islands

Frontline repairs in Fiji, Tonga, Samoa and Rarotonga.

Inspections

Independent inspections for buyers, owners and insurers.

Every inspection covers the structure, and every finding is coded and written up. Reports are clear enough for a buyer to act on and complete enough for an insurer or boatbuilder to accept.

Pre-purchase

A full condition report before you commit, with defects and recommended remedies.

Insurance

A second report written for insurance, with a valuation so the sum insured can be set.

Damage assessment

Scope, cause and repair method for hull, rig and mast damage, with liaison to repairers and insurers.

Impact damage to a trimaran float, with the outer laminate shattered and the core exposed
Trimaran float with impact damage, laminate and core exposed.

Damage assessment in practice

Every damaged area is mapped and recorded: how far the laminate and core are affected, whether the structure around it has moved, and what repair method restores it. Testing extends past the visible break, because delamination and core de-bond always extend well beyond anything the eye can pick up.

The findings go into a report that your repairer or insurer can use.

Every item gets a condition code

  • GGood. No obvious hard wear or deterioration. Safe and seaworthy.
  • SServiceable. Hard wear noted, with at least 12 months of service life remaining.
  • RRequires attention. Remediation or replacement needed to make safe and seaworthy.
  • NNot applicable to this boat.

What the checklist covers

  • Underwater exterior
  • Topsides and deck
  • Interior shell and bilge
  • Electrical and electronics
  • Engine and mechanical
  • Fuel, gas and plumbing
  • Safety equipment
  • Mast, spars and rigging

Sample condition worksheet

A blank example of the worksheet we work through on a survey: boat details first, then every item coded G, S, R or N/A with a comment where needed.

First page of the Pantera Marine condition worksheet showing the coding key and general boat details
Boat details and coding key
Page of the condition worksheet listing hull, interior and bilge items, each with a condition code and comment
Condition items, each coded and commented

The checklist matches the one insurers use. Driveline, electrical and rigging inspections are visual only, because those areas need specialist engineers and riggers.

Project management

Expert management of repair projects ensuring quality workmanship and timely completion.

Refits, structural repairs and warranty work, run with an independent surveyor alongside the project. Your repair stands up to scrutiny long after completion.

  1. 1Documentation
  2. 2Insurers require independent sign-off
  3. 3Scope changes on the record
  4. 4Warranty claims that meet manufacturer requirements
  5. 5Specialist testing
Non-destructive testing

Find hidden defects before they become structural problems.

Dry laminate, voids, delamination and moisture ingress cannot be seen. Ultrasound is one technology we use to assist mapping faults. Our customers are boat owners, boat repairers and insurers, this damage free testing works in conjunction with the repairer's assessment and together we find solutions.

  • The hull stays intact throughout testing
  • Ultrasound detects defects invisible to the eye
  • Moisture metering catches water ingress early
  • Mapped and documented for insurers and builders
  • Early detection cuts repair cost
A hand holding an Olympus ultrasonic test probe against a carbon fibre weave
Testing a carbon fibre laminate with an Olympus probe.

On the hull

Instrument
Olympus BondMaster US Navy Spec
Method
Pitch-catch (RF, impulse, swept), MIA and resonance, with moisture metering
Suited to
Cored composites including Honeycomb Nomex and Aluminium
Output
Written report with images, suitable for warranty and insurer use
Our work

Recent repairs.

A selection of structural and cosmetic repairs managed and carried out by Pantera Marine, from production catamarans to a fishing vessel in the Cook Islands.

Catana 50: major repairs

Production catamarans · Fibreglass repair · Spray painting · Project management

The deck had many dry layers in the laminate that had absorbed moisture. The repair removed the deck layers down to the foam core, and we re-laminated the deck in what became one of the most major repairs of a catamaran in New Zealand. Pantera managed the project.

Catana catamaran moored at a marina berth under a cloudy sky
1 The Catana 50 afloat repaired
Catamaran side deck with the outer layers removed, exposing the repair surface between masked edges inside a spray shed
2 Deck once layers removed
Catamaran deck with the repair areas taped off and the new laminate layers completed, inside a covered spray shed
3 Deck with all layers completed
Glossy white painted catamaran hull and cabin top with masking still in place inside a spray shed
4 Gloss topcoat, masking still on

Leopard catamaran, 2018: dry laminate repair

Production catamarans · Fibreglass repair · Foam core

Large dry areas between the laminate and the foam core were found and repaired.

White Leopard catamaran on the hardstand, supported on blocks and stands
1 The Leopard on the hardstand
Close view of the outer skin lifting away from the foam core along a curved edge
2 Large delamination formed a bubble
Yellow calipers held against the hull measuring the lifted skin and exposed foam
3 Measuring the affected area
Opened area showing fibreglass strands and the foam core exposed beneath the skin
4 Opened up, laminate and core exposed

FV Sambuca structural repairs

Major structural repair including mechanical · Offshore / Pacific

Underside of a fishing vessel hull on blocks, showing the repaired laminate, the bolted stainless shaft strut and the propeller shaft with a threaded end

Major structural repairs carried out in the Pacific Islands, including manufacturing large hull components on site. The vessel was driven up on a reef and salvaged. The hull had 73 holes, including one large enough to crawl through.

Fibreglass component lifted out of its mould on a workshop floor, with a worker holding the mould edge
Interior of a hull with a new white laminated top rail and open timber-framed bays along the side
Stainless steel shaft fitted through a bronze flange, with timber wedges set around it in freshly laminated grey fibreglass
Black-framed cabin windows on a white cabin side, seen from outside inside a workshop
Wheelhouse roof section resting on timber supports inside a shed, with cracks across the white surface

SV Freyja: rudder and running gear repair

Rudder repair · Running gear · Refit · Project management

Stern view of a sailing vessel on a haul-out trailer, showing the repaired rudder, bronze propeller and freshly coated hull

Repower, antifoul and driveline refit on a Herreshoff 56.

Request a quote

Valuations

Market-accurate valuations, so the sum insured can be set.

Valuations are written as a separate report from your defects report, so it can go straight to your insurer. Power, sail or classic.

Sum insured

A valuation your insurer can use to set the sum insured.

Specialised components

Appraisals of the whole vessel, or of components such as rigging and mechanical assets.

Repair estimates

Costed scope for the defects found, for owners, buyers and claims.

Request a valuation

Request a quote

Tell us about the boat.

Send the vessel, where she is and what you need. One form covers inspections, testing, projects and valuations.

Pantera Marine Ltd

Contact
Ms Geneva Davies
Marine Repair Specialist
Phone
+64 27 228 0061
Mon to Fri, 8:00 am to 6:00 pm
Email
geneva@panteramarine.com
Address
34 Waipu Caves Estate Drive
RD8, Waipu 0178
Northland, New Zealand
WhatsApp us